This one had me puzzled for a few days. Dynamic VTI at the Hub and VTI at the spoke. All tunnels came up, pings are working but BGP session is not establishing. I’ve used setup instructions from this YouTube Video. Packet capture shows BGP packets arriving at the Hub but …
Author: admin
Came across this issue where AP with image 8.10.130.0 could not upgrade from WLC due to low disk space. Workaround – upgrade to 17.3.7 first over TFTP and then it will reboot and upgrade from controller. Cisco Wireless Solutions Software Compatibility Matrix – here. You will need this to figure …
Reference doc on Cisco website Migrate legacy Firepower licenses to new FMC mac address on the license portal, download new licenses Backup primary and standby FMC SSH to FMC and move the backup file from /var/sf/backup/ to /var/common/ Go to https://<FMC>/ddd/#ATFileDownload;deviceId=0 on primary and standby and enter backup filename to …
Error when applying changes from FMC to FTD: Deployment failed due to a show command running parallel on Firewall Threat Defense. Let it finish or cancel it, before deploying the policy again. If deployment fails again, contact Cisco TAC. Try below from sudo on FTD and redeploy changes: pmtool restartbyid …
7 node deployment (2xPAN/MnT, 4xPSN, 1xPxGRID), preloaded upgrade file to each ISE node local disk to save time, converted licenses to 3.1 model on Smart license portal with TAC assistance. In Virtual ISE deployment, I suggest downloading the 3.1 new install image and making sure you have access to virtual …