Reference doc on Cisco website Migrate legacy Firepower licenses to new FMC mac address on the license portal, download new licenses Backup primary and standby FMC SSH to FMC and move the backup file from /var/sf/backup/ to /var/common/ Go to https://<FMC>/ddd/#ATFileDownload;deviceId=0 on primary and standby and enter backup filename to …
Tag: FirePOWER
Error when applying changes from FMC to FTD: Deployment failed due to a show command running parallel on Firewall Threat Defense. Let it finish or cancel it, before deploying the policy again. If deployment fails again, contact Cisco TAC. Try below from sudo on FTD and redeploy changes: pmtool restartbyid …
How to enable API on Cisco ISE, FMC, and ASA? The first two are easy but ASA was not. Cisco ISE. Follow this link. Very straight forward. Check if working by going to https://ISE_FQDN:9060/ers/sdk. Cisco Firepower Management Center (FMC). Not very intuitive but in the nutshell follow this setup. By …
There are a few ways to manage Cisco ASA over VPN tunnel. One is to use outside public IP unless dynamic or private/PAT IP is used. Another is by assigning dedicated interface with management-access <interface> command for over VPN access. And the last one is to manage it from the …
During the upgrade of Firepower Management Center (FMC) from 6.2.0.2 to 6.2.0.5 it failed at 72% on Patch 5 installation. Checking update status log does not provide enough information. FirePowerMC:/var/log/sf# cat update.status OUT: [180407 00:46:19] FAILED 800_post/910_Edit_AC_Policy.pl OUT: [180407 00:46:19] ==================================== OUT: [180407 00:46:19] tail -n 10 /var/log/sf/Sourcefire_3D_Defense_Center_S3_Patch-6.2.0.5/800_post/910_Edit_AC_Policy.pl.log OUT: OUT: …