I’ve discovered this problem today after several months of the system being in production without any issues (other than the one in this post). All of a sudden rules linked to user authentication stopped working. I immediately checked AD Agent for health and all was well. Below is what appeared …
Author: admin
At the time of this writing, Apple Mac with OS Sierra (10.12) fails BYOD onboarding process with Cisco ISE. If you updated device that was already on-boarded then you should be fine however new install will fail with an error: “Unable to download profile”. The good news is it is …
Recently I came across this issue and decided to write a quick post on it. Cisco Firepower User Agent stopped sending authentication logs to FMC and rules based on user id started failing. Looking at the Windows and Agent logs I discovered this error “A call to SSPI failed, see …
In this post I’ll go over initial setup of Cisco ASA 5506X-W Wireless Access Point (WAP) on Wireless Lan Controller (WLC). Components: Cisco ASA: 9.6.1-10 Cisco WLC: 8.3.102.0 ASA build-in WAP model C702 is associated to internal interface GigabitEthernet1/9. Most likely your wireless setup is leveraging AP groups and FlexConnect …
When trying to FTP image to Cisco FirePOWER module in boot recovery mode I got this error “110 Upgrade aborted“. Verifying 110 Upgrade aborted. asasfr-boot> Two things to check in this case. First, confirm connectivity to FTP server. Output “Verifying” is misleading as one would assume connectivity was confirmed. You …