I was configuring a wireless Sensor in DNAC and ran into a few issues so I’ll post my finding here. First of all, you need to properly configure Sensor DHCP scope. Options 43 and 42 will be needed. Note that option 43 has the IP of DNAC. ip dhcp pool …
Blog Posts
In Cisco DNA when you upload a Floor under Area menu you can choose default scaling options per image (width, length, height). But what if you do not know the default image scale? In this case, there is an option to manually measure a certain distance between known points within …
I ran into this issue with several 2600/2800 APs when trying to join them to Mobility Express (ME) WLC. ME was set up on 2800 AP with version 8.5.135.0. AP was 1 minor version off and it did require code update in order to join the controller. Logs from AP …
Had an Avaya IP phone connected to Cisco ASA and not receiving an IP address from DHCP scope configured on ASA. PC connected behind the phone worked just fine. Turned out to be capitalization of DHCP options. What I had was this: dhcpd option 242 ascii MCIPADD=10.10.10.10,MCPORT=1719 When I changed …
Now, once you have Radius-Challenge enabled let’s look at the enrollment user experience through Cisco Anyconnect (AC). Self-Service portal is not an option under Cisco Radius VPN application so no special configuration was needed. When user enters his credentials and logs in he is prompted with enrollment URL popup. User …