I saw this issue performing an upgrade readiness check from FMC on FTD. FMC was in HA deployment (Active/Standby pair). Other FTDs completed readiness checks successfully so it was not related to file corruption. This bug was also not related as FTD registration to both FMCs had been completed. Upgrade …
Tag: FTD
After deploying a single FTD at the remote site my next task was to configure two FTDs in a redundant High-Availability (HA) setup with Active/Passive fail-over. Again, I had to make sure the following requirements are met. configure FTD at the staging site with limited onsite availability ssh remote-access …
On several occasions, I’ve confirmed FTD 1k and 2k platforms having performance issues routing and inspecting traffic and even crashing (Cisco bug reported) on 7.0.1 code revision. It was confirmed on 1120 and 2110. One interesting find is it did not affect FTD 1010 platform and potentially a setup with …
Came across this issue which got me stumbled at first. I had a VTI tunnel to Azure with static route pointing to the next hop. FTD# sh run route | i 10.16.0.0 route Tunnel10-Azure 10.16.0.0 255.255.0.0 10.2.80.2 1 Tunnel interface was up. FTD# sh int ip br Tunnel10 10.2.80.1 YES …
I saw this issue with redundant internet up-links. Check routing for VPN gateway. I had encrypted subnet routing through secondary Internet connection but secondary VPN gateway IP was still routing through default primary Internet gateway. Once all the routing matched, VPN tunnel came up. …