During the upgrade of Firepower Management Center (FMC) from 6.2.0.2 to 6.2.0.5 it failed at 72% on Patch 5 installation. Checking update status log does not provide enough information. FirePowerMC:/var/log/sf# cat update.status OUT: [180407 00:46:19] FAILED 800_post/910_Edit_AC_Policy.pl OUT: [180407 00:46:19] ==================================== OUT: [180407 00:46:19] tail -n 10 /var/log/sf/Sourcefire_3D_Defense_Center_S3_Patch-6.2.0.5/800_post/910_Edit_AC_Policy.pl.log OUT: OUT: …
Tag: upgrade
Started this simple upgrade for Firepower Management Center (FMC) from version 6.2.0 to 6.2.2 and ended up with TAC case and many troubleshooting hours. It was a non-patched install of 6.2.0. Readiness Check passed but after 70% of the actual upgrade I got an error: System call to mkdir(/var/sf/sifile_download) Failed: …
Another case of eStreamer failure after FMC upgrade. This time after upgrade from 6.2.0.2 to 6.2.0.4 it worked for a week and after reboot ceased to send longs to Splunk.The following errors can be seen in the log. firepower SF-IMS[8734]: [20144] Event Streamer:sfestreamer [INFO] Estreamer_Poll – Got Try Again while …
My previous experience with ISE upgrade was somewhat painful but I did not have to dive into logs to move past a certain point. This time I had to dig into troubleshooting a bit deeper. Right from the beginning, I got hit with expired self-signed certificate error so I went …
After upgrading Cisco ASA code from 9.1.7 to 9.7.1 Cisco IP Phone enabled for Anyconnect VPN functionality failed to establish SSL VPN tunnel. Anyconnect client from workstation worked fine. ASDM reflected AES-GCM-256 Encryption and some one-way traffic. To get better understanding of this issue enable proper logging. logging class auth …