In preparation for Identity Services Engine (ISE) 2.1 upgrade, I’ve replicated production environment in order to validate upgrade functionality. This way I had a chance to run through restore steps and test upgrade process. This post is about my findings and lessons learned. Components: Cisco ISE: 2.0 First of all, …
Tag: upgrade
Recently I ran into an issue while applying minor upgrade on remote Firepower sensor from Management Center (FMC). I’ve tried it several times, it would start copying upgrade file over to the Sensor but then all the way at the end stop and fail with error Update Install failed. Looking …
When trying to FTP image to Cisco FirePOWER module in boot recovery mode I got this error “110 Upgrade aborted“. Verifying 110 Upgrade aborted. asasfr-boot> Two things to check in this case. First, confirm connectivity to FTP server. Output “Verifying” is misleading as one would assume connectivity was confirmed. You …
Upgrade from an earlier version of Anyconnect to version 4.x can be driven by several factors. It can be compliance in order to enable support for SSL version 1.2; or it can be assistance with the deployment of Cisco Umbrella Roaming service that protects devices anywhere against malware, phishing, and …
In this post, I’ll write about my experience with Sourcefire 6.0 upgrade. Upgrade file became available on 11/11/2015 and at the time of writing it’s been out for a few month which is “theoretically” enough time to consider a cautious transition from 5.4.x into 6.0 environment. Components: Cisco Sourcefire Defense …