Came across this issue where AP with image 8.10.130.0 could not upgrade from WLC due to low disk space. Workaround – upgrade to 17.3.7 first over TFTP and then it will reboot and upgrade from controller. Cisco Wireless Solutions Software Compatibility Matrix – here. You will need this to figure …
Tag: WLC
To join 2800/3800 ME to 9800-CL WLC you will need console access. By default AP will not join. On the console go through ME setup, assign AP username and password and reboot. Once rebooted use console to login back into AP console mode. (Cisco Controller) > apciscoshell Log in to …
I ran into this issue with 3800 AP when trying to join it to Mobility Express (ME) WLC over VPN. AP was one minor version off and was showing up on the ME but with an un-joint state. It also had this error message. AP having MAC Address [“***”] currently …
I ran into this issue with several 2600/2800 APs when trying to join them to Mobility Express (ME) WLC. ME was set up on 2800 AP with version 8.5.135.0. AP was 1 minor version off and it did require code update in order to join the controller. Logs from AP …
After getting WLC up and running I ran into the issue with the client getting IP address from management Vlan instead of proper wireless Vlan. I was getting the following debug output. Static IP client associated to interface management which cannot support client subnet Did not really make any sense …