I’ve done about 100’s of ASA upgrades remotely and over the console and I thought I’ve seen it all but apparently not. This time it was a remote upgrade from version 9.4.x to 9.6.2.x and nothing was out of ordinary. Components: Cisco ASA: 9.4.x > 9.6.2 I’ve followed the standard practice of …
Blog Posts
This issue popped up after upgrading FirePOWER Management Center (FMC) from version 6.0.x to 6.1.x and re-hosting Sensors from one manager to the other. As you upgrade Sensors to 6.1.x do not forget to match ASA code for FirePOWER devices based on the compatibility matrix. Components: Firepower Management Center: 6.0.1.2 …
In preparation for Identity Services Engine (ISE) 2.1 upgrade, I’ve replicated production environment in order to validate upgrade functionality. This way I had a chance to run through restore steps and test upgrade process. This post is about my findings and lessons learned. Components: Cisco ISE: 2.0 First of all, …
When you start Cisco Identity Services Engine (ISE) BYOD deployment you will realize a need for a flexible reporting tool and ISE reports will not be enough. For example, if you need to run reports by wireless location, or by EAP authentication method, or to distinguish between certificates deployed by …
Recently I ran into an issue while applying minor upgrade on remote Firepower sensor from Management Center (FMC). I’ve tried it several times, it would start copying upgrade file over to the Sensor but then all the way at the end stop and fail with error Update Install failed. Looking …