One of the projects I was involved in was the setup of two 4100 series Firepower Chassis Managers (FCM) in the data-center environment where high-availability and redundancy played a key role. I did my research and found no good document that would have taken me through all the steps to …
Category: Cisco
As you know Firepower Management Center (FMC) version 6.x does not require unit license (2, 10 or 25). If you ever wondered how many sensors you can ACTUALLY support on virtual FMC appliance the answer is 25. And it is a hard limit which does not depend on the Sensor model, …
In preparation for Identity Services Engine (ISE) 2.1 upgrade, I’ve replicated production environment in order to validate upgrade functionality. This way I had a chance to run through restore steps and test upgrade process. This post is about my findings and lessons learned. Components: Cisco ISE: 2.0 First of all, …
When you start Cisco Identity Services Engine (ISE) BYOD deployment you will realize a need for a flexible reporting tool and ISE reports will not be enough. For example, if you need to run reports by wireless location, or by EAP authentication method, or to distinguish between certificates deployed by …
In this post I’ll go over initial setup of Cisco ASA 5506X-W Wireless Access Point (WAP) on Wireless Lan Controller (WLC). Components: Cisco ASA: 9.6.1-10 Cisco WLC: 8.3.102.0 ASA build-in WAP model C702 is associated to internal interface GigabitEthernet1/9. Most likely your wireless setup is leveraging AP groups and FlexConnect …